Overview
Johnstones Smooth Effect Metal Paint is a hard wearing paint formulated to deliver a smooth and even finish, enhancing the appearance of metal surfaces. It offers excellent adhesion and resistance to weathering, chipping, and peeling, ensuring long-lasting protection. Suitable for both interior and exterior surfaces, making it suitable for a wide range of applications with no need for a separate primer. Can be applied direct to rust and suitable for use on rusty items.
- Long-lasting durable finish
- Apply direct to rust
- No need for a separate primer
- Primes undercoats and finishes all in one
| Area | Interior & Exterior |
| Recommended Use | Wood, Metal |
| Base | Solvent Based |
| Coverage | Up to 12m² per litre |
| Drying Time | 16-24 hours |
| Re-Coat Time | 16-24 hours |
| Recommended Coats | 1-2 coats |
| Application Method | Brush |
| VOC Levels | High |
Preparation
Ensure the surfaces to paint with Johnstones Metal Paint are fully prepared to ensure you get the best results from your paint.
- Firstly, ensure the surface is clean, dry, and free from any contaminates that may affect adhesion.
- If necessary strip to a bare surface to ensure the best results.
- Rub down well with a fine waterproof abrasive paper and rinse thoroughly.
Application
Always test a small area to ensure you are happy with the finished results, colours may vary on screen.
- Do not apply this paint in confined spaces or over large areas when indoors.
- Stir well before use, apply using a brush.
- Do not thin this product it is supplied ready to use.
- Load the brush generously with paint and apply liberally and evenly, do not overspread.
- This paint will be touch dry and recoatable in 16-24 hours.
Always follow the manufacturer's instructions found on the tin.
